Technologies
A steel sheets supplier provides raw or pre-cut metal sheet stock — typically in hot-rolled, cold-rolled, galvanized, or stainless grades — for construction, industrial, and engineering applications.
A steel sheets supplier provides raw or pre-cut metal sheet stock — typically in hot-rolled, cold-rolled, galvanized, or stainless grades — for construction, industrial, and engineering applications. A fabrication partner goes further: laser cutting, bending, and welding sheets to precise dimensions
A steel sheets supplier provides raw or pre-cut metal sheet stock — typically in hot-rolled, cold-rolled, galvanized, or stainless grades — for construction, industrial, and engineering applications. A fabrication partner goes further: laser cutting, bending, and welding sheets to precise dimensions and tolerances before delivery.
Steel sheet grade selection depends on structural load, corrosion exposure, and fabrication method. ASTM A36 hot-rolled steel handles structural frames and heavy brackets in thicknesses from 2 mm to 25 mm. EN 10130 cold-rolled steel (DC01 grade) suits precision enclosures and panels at 0.5 mm to 6 mm — thinner stock with superior surface finish. Galvanized DX51D resists outdoor corrosion for HVAC ducts and roofing. Stainless AISI 304 and 316 withstand chemical and food-processing environments. At Entag, we laser-cut all these grades to ±0.1 mm dimensional tolerance, eliminating the need to source raw stock separately.
| Sheet Type | Common Grade | Thickness Range | Typical Applications | Fabrication Process at Entag |
|---|---|---|---|---|
| Hot-Rolled Steel | ASTM A36 / S235 | 2 mm – 25 mm | Structural frames, heavy brackets, bases | Laser cutting, welding |
| Cold-Rolled Steel | EN 10130 / DC01 | 0.5 mm – 6 mm | Enclosures, panels, precision parts | Laser cutting, bending, welding |
| Galvanized Steel | DX51D | 0.5 mm – 4 mm | Outdoor structures, roofing, HVAC ducts | Laser cutting, bending |
| Stainless Steel | AISI 304 / 316 | 0.5 mm – 12 mm | Food equipment, chemical tanks, medical | Laser cutting, TIG welding |
| Aluminum Sheet | 5052 / 6061 | 0.5 mm – 10 mm | Lightweight enclosures, aerospace panels | Laser cutting, bending |
On-demand fabrication cuts lead times and eliminates waste. Upload your CAD or DXF drawing to app.entag.co. Entag's engineers select the optimal grade and thickness based on your specifications. Laser cutting occurs at ±0.1 mm tolerance — suitable for precision brackets and control panels. If your design includes bends, press brake forming follows at ±0.5° angle accuracy. Welding (MIG or TIG) joins multiple pieces if required. Quality inspection and coating (if specified) precede shipment. This workflow applies to projects in Cairo, Alexandria, Riyadh, Jeddah, and Dammam. No minimum order quantity. Turnaround: quote in 24 hours, parts in 5–10 working days depending on complexity.
Stock distributors deliver material; fabrication partners deliver finished parts. Sourcing raw sheets, then engaging a separate cutting shop, creates delays and quality handoffs. Entag combines material availability with in-house laser cutting, sheet metal bending, and welding capabilities under one vendor. For engineers in Cairo and Alexandria sourcing parts to ASTM A36 or AISI 304 specifications, this single-source approach reduces cost and cycle time. Saudi procurement managers in Riyadh, Jeddah, and Dammam benefit from the same consolidated workflow — upload a drawing, receive a finished part.
What steel sheet grades does Entag supply and fabricate?
Entag works with hot-rolled ASTM A36, cold-rolled EN 10130 (DC01), galvanized DX51D, stainless AISI 304 and 316, and aluminum 5052/6061. Each grade is available for laser cutting, bending, and welding to your exact drawings — no need to source raw material separately before fabrication.
What is the minimum and maximum sheet thickness Entag can laser cut?
Entag's laser cutting handles steel sheets from 0.5 mm up to 25 mm, depending on material type. Stainless steel and aluminum have slightly lower maximums. Dimensional tolerance across all cuts is ±0.1 mm, making it suitable for precision enclosures and structural brackets.
How is Entag different from a regular steel sheets supplier in Egypt?
A standard supplier sells raw stock. Entag is a fabrication partner: you upload a CAD file, select your material grade, and receive finished, cut-to-spec parts — laser cut, bent, and welded — ready for assembly. No intermediate processing step required.
Can I order custom-cut steel sheets in small quantities?
Yes. Entag's on-demand model has no minimum order quantity for laser cutting and sheet metal fabrication. Whether you need 5 prototype panels or 500 production parts, the same ±0.1 mm tolerance and 24-hour quoting process applies.
Does Entag supply and fabricate steel sheets for projects in Saudi Arabia?
Entag serves engineering teams in Riyadh, Jeddah, and Dammam in addition to Cairo and Alexandria. Projects are quoted online via CAD upload. Lead times and logistics for Saudi projects are confirmed at the quoting stage based on part complexity.
What file formats does Entag accept for steel sheet cutting orders?
Entag accepts DXF, DWG, STEP, and PDF technical drawings for sheet metal orders. For bending and welding jobs, a 3D STEP file is preferred to capture fold lines and weld specifications accurately. Upload directly and receive a detailed quote within 24 hours.
Ready to start your project? Request a quote on Entag — upload your CAD file and get a price in 24 hours.
